TOP 10 best vibration pumps: overview, selection rules, reviews



[ad_1]

Vibration pumps are the most utilitarian mechanisms that are characterized by an optimal ratio of price, quality and performance. Therefore, they are very popular among the whole variety of submersible pumps. The vibration pump is suitable for wells up to 80 meters deep. This review with technical characteristics, pros and cons of domestic and foreign models will help you choose the best device.

How to choose a vibration pump

When buying a vibration pump, you should pay special attention to:

  • suction depth — the parameter varies from 3 to 60 meters of depth. It all depends on the goals and operating conditions: up to 3 meters is suitable for pumping water from the basement, and from 10 to 60 meters for a well, a well.
  • delivery head — for most models it is from 15 to 75 meters. When the pump is used for irrigation, this figure is not very important. If water is pumped to a hill into a container, then the height difference must be taken into account.
  • Power — standard indicators from 200 to 280 watts. The more productive the device, the easier it is to endure a continuous load.
  • Performance — per hour, such pumps can pump from 0.9 m³ to 1.6 m³. If the pump is needed to service the pool, drain the basement, then you should choose a device with high values.
  • Power cable length — equals 10-40 meters. Here you need to look at the remoteness of the location of the electrical outlet.
  • Suction valve location — can be lower and upper. It is recommended to take it with a top location so that the pump does not suck up sediment.
  • Working position — vertical or horizontal. More often, devices provide a vertical position, but there are mechanisms that lie on their side.
  • The weight — ranges from 3 to 6 kg. A vibration pump with a low weight is much easier to lower and raise.
  • Protective functions – for example, protection against dry running when the hose is kinked or overheating of the winding.

The best vibration pumps

Vortex VN 10N

Vortex VN 10N

A vibration pump with a lower domestic water intake is used to supply clean water, including drinking water. The depth of a well, well, reservoir can reach 72 m or more. Such a device can supply water to horizontal distances of more than 100 m, which allows pumping liquid from distant water sources. The body of the device is made of metal, resistant to mechanical damage, which guarantees a long service life.

Characteristic Meaning
Inner diameter 100 mm
Performance 18 l/min
The weight 3.5 kg

Pros:

  • high power — 280 W;
  • aluminium case;
  • ten-meter power cord;
  • the presence of thermal protection;
  • raises water to a height of 72 meters.

Minuses:

  • no dry run protection;
  • the metal body is susceptible to corrosion.

Review: Quiet! I was very pleased that he had a noble quiet sound! It justifies its declared 18 l / m (I checked it with two buckets and a stopwatch). ”

Livgidromash Malysh BV 0.12 40 U5 10 m

Livgidromash Malysh BV 0.12 40 U5 10 m

The household vibration pump is designed to supply water from mine wells, wells with an internal diameter of more than 100 mm. It is suitable for irrigation of adjacent plots, gardens, orchards. The supplied water must not contain aggressive or mechanical impurities. The 240 W pump with bottom water intake can pump liquid horizontally over a distance of more than one hundred meters. The domestic manufacturer provides a one-year warranty for this equipment.

Characteristic Meaning
Inner diameter 99 mm
Performance 1.5 m³/h
The weight 3.4 kg

Pros:

  • powerful motor;
  • does not require lubrication;
  • durable body;
  • raises water from a depth of 40 meters;
  • complies with safety standards.

Minuses:

  • thermal protection function is optional;
  • when taking water from the bottom hole, small debris can be drawn.

Review: “Recently dug a well. The pump was bought by the workers themselves. Depth is about 8-9 meters. A small bucket is gaining in 30 seconds. Noisy, but not critical.

Aquarius-3 BV-0,12-40

Aquarius-3 BV-0,12-40

Domestic-made electric submersible pump with a powerful motor (256 W) is a great helper in farming, gardening or household. Raises clean water from wells and wells up to forty meters deep. The vibration pump with a lower water intake is equipped with a three-wire wire with the possibility of grounding. The length of the power cable is 40 meters, which eliminates the need for additional carrying. Pumping parts are made of natural rubber, which guarantees their reliability and long service life.

Characteristic Meaning
Inner diameter Not less than 100 mm
Performance Up to 1000 l/h
The weight 8 kg

Pros:

  • built-in thermal protection;
  • high-quality materials for components;
  • bottom position of the suction valve;
  • as standard there is a nozzle for watering;
  • immersion depth is 60 meters.

Minuses:

  • quite heavy weight;
  • combined body — metal + plastic.

Review: “The Aquarius pump is an excellent find for domestic use, pumping wells, watering a summer cottage. The price and quality of the goods are favorable. Convenience and ease of use.»

Gileks Poplar Kid M-40m 1kl

Gileks Poplar Kid M-40m 1kl

Vibrating type pump with top water intake and forty-meter power cable from the mains is designed for wells, water tanks, open reservoirs, wells, garden and vegetable garden irrigation. The flow part is made of metal. The first class of protection against electric shocks and voltage surges. Connected hoses must be flexible, rubber or plastic with an inner diameter of 18 to 22 mm. This model is durable and easy to use.

Characteristic Meaning
Inner diameter Over 110 mm
Performance 1.5 m³/h
The weight No more than 3.4 kg

Pros:

  • high motor power — 240 W;
  • there is a ground wire;
  • can be used in vertical and horizontal position;
  • the average service life is 2.5 years;
  • inexpensive.

Minuses:

  • do not pump contaminated water;
  • loud noise.

Feedback: “For a long time I was looking for such a pump for the country, I bought it for a well, so the power and length of the cord suited me very much. Delivered within 24 hours, which is very good, packed perfectly, even the dumbest will understand the operation. ”

Sibrtech SVN300-10

Sibrtech SVN300-10

The 300 W motor is capable of pumping large volumes of clean water (filterable solids up to 1 mm). The aluminum body is not subject to mechanical damage and is light in weight. The product package includes a cable for immersing the pump to a depth of 5 meters and a clamp for fixing the hose. The power cord is only 10 meters long. Thanks to the top water intake, settled debris does not get inside the pump.

Characteristic Meaning
Inner diameter Over 100 mm
Performance 1200 l/h
The weight 3.2 kg

Pros:

  • low cost;
  • immersion depth of more than 3 meters;
  • durable metal case;
  • high motor performance;
  • one year manufacturer’s warranty.

Minuses:

  • small length of the power cable;
  • RCDs are required to protect against voltage surges in the network.

Stavr NPV-300V

Stavr NPV-300V

The vibrating well pump with a 300W motor is capable of lifting water up to 70 meters high, which is important for uneven terrain. The aluminum body is characterized by a long service life and is not subject to corrosion. The manufacturer provides a durable nylon diving cable, a rubber piston, a valve cuff and a hose clamp. There is an automatic motor protection against overheating, which greatly simplifies operation.

Characteristic Meaning
Inner diameter 125 mm
Performance 18 l/min
The weight 3.2 kg

Pros:

  • extended warranty up to 3 years;
  • the size of the passed solid particles reaches 5 mm;
  • it is completed with a ten-meter submersible cable;
  • good head;
  • built-in overheating protection.

Minuses:

  • there are complaints about the power cord;
  • cannot be installed horizontally.

Review: «Perfect for a holiday home. Neighbor advised. It pumps perfectly, watering is no longer a problem. I liked the powerful force. This is an important advantage, since the well is deep. The pump housing itself does not rust.

Unipump Bavlenets BV 0.12-40-U5

Unipump Bavlenets BV 0.12-40-U5

Vibration pump with lower water intake of the Bavlenets series is used to supply liquids without impurities of sand or debris from wells, wells, various reservoirs, open reservoirs. The equipment is powered by AC 220 V or solar, benzoelectric generators. Can be used for organizing individual water supply systems, pumping tanks. Due to high safety standards, it is suitable for supplying drinking water.

Characteristic Meaning
Inner diameter Not less than 100 mm
Performance 1600 l/h
The weight 3.5 kg

Pros:

  • high protection class — IPX8;
  • forty-meter power cord;
  • pumps out water to a minimum level;
  • can work from a generator with a power of more than 0.5 kW;
  • works without stopping for 2 hours, then a break for 20 minutes.

Minuses:

  • immersion depth 3 meters;
  • flimsy rope for diving.

Review: “The pump is the best of its kind. The highest productivity up to 1600 l/h, rubber elements made of natural rubber.

Olsa Creek-1, 10m

Olsa Creek-1, 10m

A submersible well pump with a 225 W motor, an upper water intake and a ten-meter power cable is perfect for small household plots and farms. The maximum pressure reaches 60 meters in height, respectively, you can dive to a depth of 60 meters. There is an automatic overheating protection. The absence of rubbing and rotating parts ensures long and trouble-free operation. Water, passing through the electromagnetic drive, is magnetized and becomes even more useful for watering the garden.

Characteristic Meaning
Inner diameter Up to 99 mm
Performance 1.05 m³/h
The weight 3.6 kg

Pros:

  • ease of operation;
  • good performance indicators;
  • no restrictions on the depth of immersion;
  • noise and vibration at an average level;
  • made according to GOST.

Minuses:

  • unreliable fastening of bolts;
  • fasteners rust.

Feedback: “The pump is good, but weak. It is clear that they make it for all reservoirs and for wells from 75 to 99 mm in diameter. Simple, cheap, unpretentious, worked for 3 years without getting out of the well. Worth your money.»

Zubr ZNVP-300-10_M2

Zubr ZNVP-300-10_M2

The productive and reliable Zubr pump has a simple design and does not require maintenance. A large head (up to 60 m) allows you to raise water from a well or well even into a two-story house. Due to the design features, the 300 W motor consumes 25% less electricity than similar models. Operational safety is guaranteed by a three-core wire, and a copper wire in the winding increases the life of the motor. The pump resource is at least 200 hours of continuous operation, while other models have only 100 hours.

Characteristic Meaning
Inner diameter
Performance 24 l/min
The weight 3.7 kg

Pros:

  • five-year manufacturer’s warranty;
  • all electrical elements are fully waterproofed;
  • the presence of a built-in check valve prevents water from draining;
  • the water intake fitting is located on top to prevent sediment from entering the pump;
  • hanging cord included.

Minus:

  • no clamp included;
  • thin rope for hanging.

Feedback: “I pumped up a 200 l barrel in a little less than 15 minutes, from the well to the barrel 35 m, without climbing (3/4 hose). Cable 0.5 square, in my opinion is not enough, you need at least 1 square. But in general, a good unit, shakes well.

PATRIOT VP-10

PATRIOT VP-10

This vibration pump is designed to lift water from wells and wells up to 10-15 meters deep to a height of up to 60 meters. Simple installation can be carried out by yourself, as well as maintenance. The built-in thermal protection sensor and double isolation of current-carrying elements provide safety and service life. A special hole for the cable makes it easier to lower and raise the pump. The power cable with euro plug is durable and elastic.

Characteristic Meaning
Inner diameter Over 100 mm
Performance 1080 l/h
The weight 3.25 kg

Pros:

  • allowable temperature of the pumped liquid 40 degrees;
  • the presence of protection against dry running;
  • thermal relay prevents overheating of the pump;
  • aluminum alloy body;
  • not afraid of corrosion.

Minuses:

  • connector must be purchased separately;
  • eight meter power cord.

Feedback: “It works, it pumps perfectly, the pressure is good. Honestly worked for 3 years from spring to autumn. Bought for giving in the well.

Product comparison table

Product Name Inner diameter Performance The weight
Vortex VN 10N 100 mm 18 l/min 3.5 kg
Livgidromash Malysh BV 0.12 40 U5 10 m 99 mm 1.5 m³/h 3.4 kg
Aquarius-3 BV-0,12-40 Not less than 100 mm Up to 1000 l/h 8 kg
Gileks Poplar Kid M-40m 1kl Over 110 mm 1.5 m³/h No more than 3.4 kg
Sibrtech SVN300-10 Over 100 mm 1200 l/h 3.2 kg
Stavr NPV-300V 125 mm 18 l/min 3.2 kg
Unipump Bavlenets BV 0.12-40-U5 Not less than 100 mm 1600 l/h 3.5 kg
Olsa Creek-1, 10m Up to 99 mm 1.05 m³/h 3.6 kg
Zubr ZNVP-300-10_M2 24 l/min 3.7 kg
PATRIOT VP-10 Over 100 mm 1080 l/h 3.25 kg

Before you buy a vibration submersible pump for private use, you should calculate the approximate volume of pumped water in order to select a model with a suitable performance. The length of the network cable is also important, as well as the possibility of maintenance in a service center. This review-rating and real customer reviews will help you choose the best vibration pump.

Метки: , , , , , ,

Добавить комментарий