Top-10

The IF-heater is an effective and economical device for space heating. The technique of this type makes it possible to create coziness and comfort in domestic and industrial conditions. The Ballu brand is a relatively young, but already well-established company producing climate control equipment. The products are distinguished by reliability, manufacturability and affordable price, the most modern technologies are used in production.

To facilitate the choice of devices, a list of the most functional devices was compiled. Among them it is possible to meet standard heaters and more expensive fixtures. When compiling the review, the purpose of the product, its advantages and disadvantages, expert assessments and customer reviews were taken into account.

Rating of the best Ballu infrared heaters

BIH-AP4-1.0

A convenient heater is suitable for local heating of the working area in rooms with an area of ​​up to 12 square meters. m with high ceilings or insufficient thermal insulation, where the use of conventional heating methods is inefficient. The body of the product is made of reliable metal, guarantees wear resistance and durability of operation. The device has a power of 1000 W, mounted on the ceiling or fixed against the wall. Universal swivel brackets allow you to easily set and adjust the heating angle. The product has a compact body and walls with increased angles of inclination. A high degree of dust and moisture protection allows you to use the device even in open areas.

The device emits thermal energy in the IF spectrum. Heat almost without loss will reach the heated surface. This will create a mild, proper indoor climate with the smallest temperature difference. In addition, when staying in the IF heating zone, heat is absorbed by the surface of the body and clothing, which will ensure comfort even at low temperatures.

Installed the device in the carpentry workshop. Fasteners and bracket were included, installation was easy. The heater is thin and extremely compact. Heating quality is good enough, heat transfer is high. There are no extraneous smells and sounds during operation. Reliably protected from moisture and dust. I advise.

BIH-AP4-0.6

Ergonomic heater designed for local heating in rooms with high ceilings or poor thermal insulation. Universal swivel brackets included in the package allow you to effortlessly install the device and adjust the heating angle. The product has a compact body and walls with increased angles of inclination.

The high degree of dust and moisture protection IP54 allows the device to be used even in open areas. Its location on the ceiling will make it possible to keep the working area free and prevent the risk of burns. The device has a comfortable modern control and has a long service life. The heater is resistant to aggressive weather conditions, moisture and other influences. When using such a product, the temperature inside the room will be evenly distributed.

The device was placed in the workshop under the ceiling. Installation was easy. Due to the light weight, reinforced fasteners are not required. We use it to provide additional heating. Quickly copes with the dampness that constantly forms in the room. I recommend.

BIH-S2-0.6

A well-thought-out heater that is able to heat rooms with an area of ​​​​up to 12 square meters. m with a power of 600 watts. The original heating element operates on the principle of a cable “warm floor”. The greatest efficiency will be achieved due to double thermal insulation using auxiliary shielding. The durable case is protected from moisture penetration, so the device is suitable for a damp room, where it is risky to install conventional heaters.

During operation, the device will not burn out oxygen inside the room, as a result of which the air will not dry out. 4 auxiliary fasteners will allow you to hang the device on cables if necessary. At the same time, it is possible to install the device on false ceilings, which are still popular among buyers. Additional shielding reduces heat losses that occur due to heating of the rear part of the heater. Due to the low noise level, the operation of the device will not create discomfort.

Silent device. I will note the energy efficiency. There is also an option to connect a thermostat. Almost invisible in the ceiling space, with a competent approach and compliance with all installation requirements. The surface does not burn through and does not change the color structure.

BIH-APL-1.0

An electric IF heater with a power of 1 kW is suitable for main and auxiliary space heating, as well as local heating of a working area up to 10 sq. m. The device is designed for wall or ceiling installation. The case is made of durable materials, including anodized outer panels. In addition, it is allowed to use the product for cleaning surfaces from ice, snow. The product is energy efficient.

Brackets and other useful mounting accessories are included. Ease of control is achieved due to the possibility of connecting to a thermostat. The device is ideal for indoor use: installation on brackets with a suspension kit will significantly save space. In addition, during operation, the heater will not burn oxygen and create a burning smell.

Good compact heater. Differs in economy of power consumption and simplicity of installation. We bought 4 pieces for the workshop, additionally put a thermostat. The purchase was fully justified.

BIH-AP4-0.8

Compact and slim IF heater with nice design. Suitable for local heating of the working area in rooms with high ceilings or inadequate thermal insulation. The power of 800 W is enough to heat rooms with an area of ​​up to 16 square meters. m. The body is painted with heat-resistant paint, which does not darken over time. There is moisture and dust protection, in connection with which the device can be used even in open areas. The body and other elements are made of stainless steel.

The kit comes with swivel brackets that allow you to adjust the angle of heating and guarantee ease of installation. The product is placed on the ceiling or wall (height from 240 to 350 cm should be taken into account). During operation, the product will not make noise, heating is fast enough. The white-gray tones of the device will help the model fit into the overall interior.

Installed the product in a kiosk under the ceiling. It does not take up space, the air does not dry out, there is no smell of burning. Electricity consumption is negligible. The case is reliable, did not bend during installation. I advise.

BHH/M-09N

Compact IF heater, which is easy to use and quickly heats up the room. The small size will make it easy to take it on the road (for example, to transport to the country). The option of regulating the heating power and air heating temperature will create greater comfort during the operation of the device. The operation is controlled by a control unit, which includes 2 buttons with full and half power. The product quickly reaches the desired temperature, does not burn oxygen and does not dry out the air.

Due to the absence of convection, dust does not rise into the air during operation. The device is equipped with a reliable protective system against overturning and overheating. The heater is often used for heating small household and office premises. Its operation is especially convenient in places where there are no heat sources other than electricity. The device has a stylish modern design, so it can fit into any interior.

Quality heater. A small room heats up in half an hour. The heating elements also perform the function of a lamp (the light is bright enough). The case itself is quite light. Good model for the price.

BIH-APL-0.6

The product is suitable for the main and auxiliary heating of domestic premises. Also, the device can be used as a heater for local heating of the working area of ​​small areas. The case is made of durable stainless steel, protected from moisture and covered with a heat-resistant special paint that does not darken over time. Power of 600 W covers a heating area of ​​6 square meters. m. It uses anodized panels of increased thickness (25 microns). Other features include light weight and the option of combining several of these devices into a group.

Universal fasteners make it possible to mount the product to the ceiling, to the wall, and also hang it on a cable. Designed for indoor areas, however, it is also used to remove icing and prevent surface freezing. The heater is highly energy efficient. The heating panel will make the device as efficient as possible, making it possible to heat surfaces in a few minutes. The control of the model is mechanical with 1 mode of operation. The product works without noise, heats up immediately after start-up.

We use the device in the country in the kitchen. Installed on the ceiling, the assembly is of high quality. Operates without noise, does not overdry the air. I also note the economical use of electricity. The temperature is holding up well. Everyone is happy.

BIH-APL-2.0

A modern economical heating heater, which is designed to heat a room up to 20 sq. m. The device guarantees local heating of the working area in rooms with high ceilings or poor thermal insulation. The option of local mounting above the working area ensures high energy efficiency. The heating element helps to heat the layers of air quickly and thoroughly. The product can be mounted on the wall and on the ceiling, the maximum installation height is 2.4-4.5 m.

It functions without noise, does not dry out the air, does not create a burning smell. Mounting on the ceiling makes it possible to keep the working area free and prevent the risk of burns. Reliable radiant panels with 25 µm anodizing guarantee efficiency throughout the life of the device.

Took 5 pieces to heat a small restaurant. Mounted on the ceiling, everything you need was included. Heating is fast enough, first the floor is heated, and then the objects, and then the air from them. In order to control comfort, I purchased a thermostat. In general, everyone is satisfied.

BIH-APL-0.8

Functional heater suitable for the main and auxiliary heating of domestic premises up to 8 sq. m. In addition, it is allowed to use such a device for cleaning surfaces from ice and snow. The product is highly energy efficient. The accuracy of the control of the device is possible due to the option of connecting to a thermostat. The model is ideal for indoor use: the ability to install on brackets with a suspension kit will save a lot of space. In addition, during operation, the product will not dry the air and create a burning smell.

The device is recommended to be installed in rooms with inadequate thermal insulation, where the use of conventional heating methods is inefficient. The option of local mounting above the place where people are located guarantees the economy of electricity consumption. In order to ensure efficient functioning, such devices have anodized with increased thickness — 25 microns. The special corrugation of the working panels will improve the efficiency of the IF heating.

Bought for the garage, never regretted. The device does not take up space, like stationary models. Heats the room efficiently. I bought and connected the thermostat myself. Everyone is happy.

BIH-L-3.0

Ergonomic powerful IF heater, effectively working in closed and semi-open spaces. The power of 3000 W is enough to heat rooms with an area of ​​30 square meters. m. The device is intended for use in rooms with ceilings no more than 4.5 m. The product is suitable for mounting on any surface using a bracket or a steel telescopic leg. A high degree of moisture protection will make it possible to use the heater even on verandas.

The robust housing effectively protects the device from damage and deformation. Convective cooling prevents the model from overheating. The design involves power control and a thermostat. The reflector with a ribbed coating will ensure uniform heating of the space. The heater can be turned at the required angle, mechanical control. The protective grille prevents the occurrence of burns, during the overturning the device turns off. The thermostat helps to protect the product from overheating, as well as maintain the desired temperature in the room.

Convenient heater. Fixed it on the wall in the garage. At a distance of up to 6 m from the device is quite comfortable. The protective mesh provides protection against impacts and penetration of small particles. The thermostat helps to maintain the temperature, prevents overheating. I advise.

Types of emitters in heaters

The performance of infrared heaters will depend on the type of emitter. Main types:

• TEN. The most powerful and durable. It has no visible light, but is capable of making slight noises.
• Ceramic. It features fast heating and cooling, economical consumption of electricity, as well as a high price.
• Carbon (quartz). It has a fairly high efficiency. It is characterized by low energy efficiency and short service life.
• Halogen. It is distinguished by the supply of short waves, less useful for the human body. In this regard, such heaters are suitable only for short-term use.

Tips for choosing IF heaters

Before buying an infrared heater, you should focus on the key parameters of product selection. The main ones are:

• Power. It is recommended to build on the ratio of 1 kW per 10 square meters. m. However, it is optimal to buy products with a power slightly higher than the calculated one.
• Execution. Devices can be ceiling, wall or floor. Ceiling ones have a larger radiation range, they are placed in large rooms. Floor mounted suitable for carrying around the rooms.
• Moisture protection. When it is planned to use a heater on the veranda or in the bathroom, then this parameter will be extremely important when choosing.
• Protection level. High-quality devices are equipped with protection against overheating — this will not allow them to burn out under heavy loads. Floor products have the option of auto-shutdown when capsizing.
• Emitter type. These are heating elements, halogen or quartz lamps. Each type of emitter has certain pros and cons (for example, quartz heats up quickly, and the heating element is highly energy efficient).
• Additional functionality. Overheating and tip-over protection indicators increase the fire safety of the device. The thermostat helps to maintain the desired temperature inside the room, the remote control will allow you to control the product from a distance.

Метки: ballu, best, choice:, features, heaters, infrared, parameters,, reviews