TOP 10 best welding generators: rating 2020-2021 and how to choose the right device



[ad_1]

The welding generator is a copy of the power plant with a built-in welding machine. The equipment has many advantages, such as mobility, compactness, stability, high efficiency, auto-start function, and so on. But in order for the generator to meet all the requirements of the buyer, it is necessary to choose it correctly. The article provides an overview of the best models, which will greatly facilitate the buying process.

How to choose and what to look for?

  1. Pay attention to the value of the welding current. Usually specified in a specific range. The higher the index, the larger the diameter of the electrodes can be used.
  2. Type of welding current. It can be constant or variable. It is better to give preference to models with direct current. They allow you to achieve smooth ignition of the electric arc, its stable burning.
  3. For power and output voltage. The higher the power, the more efficient the work with welding. If we consider the issue of phases, then three-phase welding generators allow you to connect a large number of single-phase and three-phase users.
  4. Decide on the type of fuel. Stations run on petrol or diesel. The second type of fuel is considered economical. But when choosing, the buyer should start from personal preferences.
  5. Explore additional features. A good indicator for the model is the presence of a protection system, autorun, fuel economy at minimum loads.

The best welding generators

Huter DY6500LXW

The gasoline generator is suitable for creation of the reserve power supply, application in the form of the welding equipment.

Endowed with a piston engine Huter 188F with 1 cylinder and 4 cycles, air-cooled.

The control panel includes a voltmeter, control indicators, toggle switches for turning on the ignition, activation protection and terminals for 12 V plus a ground terminal.

The unit is mounted on a steel frame, complete with handles and wheels. Operation and maintenance is carried out without special skills of the operator.

Characteristics:

  • voltage — 220 V;
  • engine power — 15 liters. With.;
  • tank volume — 22 l;
  • active power — 5 kW, max. — 5.5 kW;
  • Max. welding current — 200A;
  • noise level — 71 dB;
  • sockets — 2 x 220 V, 1 x 12 V;
  • dimensions — 70x57x53.5 cm;
  • weight — 72 kg.

Advantages:

  • stable supply of electricity;
  • welding function;
  • overload protection;
  • quick manual or electric start of the system;
  • suitable for welding all types of metals;
  • the ability to connect electrodes to 7 mm;
  • quiet work.

Fubag WS 230 DC ES

Single-phase generator with Fubag GF 460 engine. Presented as a gasoline power plant with built-in welding machine.

The user can carry out arc welding with electrodes with a diameter of 5 mm, while appreciating the high quality of the joint at the junction. The electric starter allows you to quickly start the unit, regardless of the surrounding weather.

The generator additionally has an on-board battery, built-in overload protection, low oil level indicators.

You can use additional options — ground cable DX50, electric holder with cable DX50.

Characteristics:

  • engine capacity — 458 cubic meters. cm, power — 13.4 liters. With.;
  • tank volume — 25 l;
  • active power — 5 kW;
  • welding current — 50-230 A;
  • sockets — 2 x 220 V;
  • electrode diameter — from 1.6 to 5 mm;
  • dimensions — 73x59x53.5 cm;
  • weight — 94 kg.

Advantages:

  • 9 hours of battery life;
  • capacious fuel tank;
  • easy-to-operate electric starter;
  • high-quality welding seam;
  • quiet work;
  • clear control panel;
  • economical fuel consumption;
  • universality;
  • durability.

Fubag WHS 210 DDC

Three-phase, gasoline, welding generator with direct current (DC), professional air-cooled Honda GX 390 engine.

Designed to perform complex tasks in the construction and installation area, emergency situations.

Allows connection of rutile electrodes up to 5 mm, as well as a large number of three-phase and single-phase users.

The unit is located on a reinforced frame, which protects it from various negative impacts.

Characteristics:

  • engine capacity — 389 cubic meters. cm, power — 13 liters. With.;
  • tank volume — 25 l;
  • active power — 5 kW, total — 7 kW;
  • current strength — 9.1 A, welding current — 50-210 A;
  • sockets — 1 for 220 V, 1 for 380 V;
  • dimensions — 73x59x53.5 cm;
  • weight — 87 kg.

Advantages:

  • battery life up to 9 hours;
  • sufficient strength of direct welding current;
  • intuitive display;
  • economical OHV engine;
  • bayonet connectors for quick connection of welding cables;
  • socket protection;
  • additional options in the form of a handle and wheels.

EUROPOWER EP200X2

Gasoline welding generator based on the Huter 188F engine with an air cooling system, manual and electric start type.

It is actively used in welding, construction and installation works in places with regular power outages.

It operates in two modes — a power plant with a synchronous alternator, DC welding.

Various electrodes can be connected, but with a diameter of up to 4 mm. This is a single-phase model with several sockets for connecting appliances, appliances, tools.

Characteristics:

  • engine power — 15 liters. With.;
  • specific fuel consumption — 374 g / h;
  • tank volume — 22 l;
  • active power — 5 kW, max. — 5.5 kW;
  • Max. current strength — 200 A;
  • sockets — 2 x 220 V, 1 x 12 V;
  • dimensions — 70x57x53.5 cm;
  • weight — 72 kg.

Advantages:

  • quick start in any weather;
  • high level of reliability;
  • suitable for welding any metals;
  • smooth, accurate welding seam;
  • good protection of sockets and the unit itself;
  • mobility;
  • versatility.

Kronwerk LK 210E

Gasoline model with synchronous alternator, electric and manual start. Designed to provide users with electricity, as well as to play the role of a full-fledged welding equipment.

The single-phase generator has several key features — a protective function against overload and overheating of the system, AVR, DC, fuel and oil sensor.

The power plant is equipped with wheels to increase mobility, a silencer to reduce noise during operation.

Characteristics:

  • engine capacity — 420 cubic meters. cm, power — 15 liters. With.;
  • fuel consumption — 2.6 l / h;
  • tank volume — 25 l;
  • protection class — IP23;
  • active power — 4.5 kW, max. — 5 kW;
  • sockets — 2 x 220 V, 1 x 12 V;
  • dimensions — 70x58x54 cm;
  • weight — 73 kg.

Advantages:

  • functional;
  • economical fuel consumption;
  • capacious fuel tank;
  • intuitive control settings;
  • welding function;
  • overload protection;
  • smooth welding seam.

TCC SGW-4000 EH

Single-phase gasoline generator with built-in arc welding function. It is intended for use in the construction area, other installation works.

The rated welding current is 190 A, which defines the unit as professional equipment.

Various electrodes with a diameter of 1.6 to 5 mm are used for welding.

In the role of a power plant, the model showed itself on the positive side: it allows you to connect single-phase users, solves problems with a lack of electricity, and is equipped with a voltmeter to evaluate operating parameters.

Characteristics:

  • electric and manual start;
  • fuel consumption — 2.4 l / h;
  • tank volume — 25 l;
  • active power — 4 kW;
  • sockets — 1 for 220 V, 1 for 12 V;
  • dimensions — 73x59x53 cm;
  • weight — 82 kg.

Advantages:

  • reliable four-stroke air-cooled engine;
  • capacious fuel tank;
  • economical fuel consumption;
  • welding function;
  • neat welding seam due to high-quality DC;
  • durability;
  • mobility;
  • multifunctionality.

TSS DGW-200ES

This is a welding diesel single-phase generator in a noise-protective casing. Designed to perform manual arc welding, to create an autonomous source of electricity.

Features a powerful 188F series (1 cylinder, 4 stroke) air-cooled engine.

To perform welding, it is necessary to connect electrodes with a diameter of 1.6 to 4 mm. Also, the power plant has a built-in AVR system for automatic voltage control.

Starting occurs with an electric starter, while the injector instantly injects fuel into the system, making it easier to start.

Characteristics:

  • engine capacity — 456 cubic meters. cm, power — 8.2 liters. With.;
  • fuel consumption — 1.9 l / h;
  • tank volume — 12.5 l;
  • active power — 3 kW, max. — 3.5 kW;
  • welding current strength — 50-190 A;
  • noise level — 72 dB;
  • sockets — 2 x 220 V, 1 x 12 V;
  • weight — 145 kg.

Advantages:

  • durable soundproof casing;
  • overload protection system;
  • welding function;
  • wide choice of electrode diameter;
  • accurate welding seam;
  • continuous arc feed;
  • mobility.

TCC DGW-200E

Single-phase, diesel, welding generator based on an air-cooled 188F engine. Equipped with an electric starter and manual start of the system.

Acts as an efficient power plant to supply stable current, DC welding structure for welding seams on various metal.

The unit is located on a reinforced frame with wheels.

This allows you to easily move it around the work area, protect it from adverse external factors.

Characteristics:

  • engine capacity — 456 cubic meters. cm, power — 8.2 liters. With.;
  • fuel consumption — 1.9 l / h;
  • tank volume — 12.5 l;
  • active power — 3 kW, max. — 3.5 kW;
  • welding current — 50-190 A;
  • sockets — 2 x 220 V, 1 x 12 V;
  • electrode diameter — 1.6-4 mm;
  • weight — 112 kg.

Advantages:

  • effective overload protection;
  • sockets are equipped with additional protection;
  • multifunctionality;
  • uninterrupted power supply;
  • quiet work;
  • welding power adjustment;
  • economical fuel consumption.

Pramac W 220

Three-phase gasoline welding generator with manual start, air-cooled Honda GX390 engine system.

Able to provide a large number of single-phase and three-phase electricity users. If you connect the electrodes, then you can weld any metals with a neat seam.

The front panel is equipped with a voltmeter, a display with operating parameters. Overload protection prolongs the life of the entire device when operating under extreme conditions.

Characteristics:

  • engine capacity — 389 cubic meters. cm;
  • fuel consumption — 2.8 l / h;
  • tank volume — 6.1 l;
  • active power — 4.5 kW, max. — 4.9 kW;
  • sockets — 2 for 220 V, 1 for 380 V;
  • dimensions — 87.5x60x62 cm;
  • weight — 80 kg.

Advantages:

  • multifunctionality;
  • effective overload protection;
  • high rates of arc welding;
  • strong reinforced frame;
  • economical fuel consumption;
  • quick manual start.

CALIBER BSEG-5500A

Single-phase gasoline power plant with electric starter and manual start of the system, with built-in welding. Developed on the basis of the air-cooled HT190FDE propulsion system.

For welding, it is enough to select electrodes with a diameter of 2.5-4.2 mm.

Users note a high-quality, smooth and even welding seam at the junction of metal products. For convenient transportation, the manufacturer has endowed the generator with large wheels.

Characteristics:

  • engine power — 14 liters. With.;
  • fuel consumption — 1.1 l / h;
  • tank volume — 25 l;
  • active power — 5 kW, max. — 5.5 kW;
  • there is a voltmeter;
  • welding current strength — 50-190 A.

Advantages:

  • high welding quality indicators;
  • reliable overload protection;
  • economical consumption of gasoline;
  • sufficiently capacious tank;
  • trouble-free electric starter;
  • welding function;
  • uninterrupted power supply.
Метки: , , , , , , ,

Добавить комментарий