Top-10

It is hard to imagine a modern overhaul of an apartment or a private house without the use of a wall chaser. After all, without this tool it is impossible to cope with such a difficult task as laying wiring and pipes. Fortunately, the modern market is filled with a variety of models, and among them there are both expensive and very budget options. True, choosing a quality wall chaser is still far from always easy. If only because even an experienced user, not to mention a beginner, can get lost in numerous characteristics.

Rating of wall chasers

8 Hammer STR150

Wall chaser Hammer STR150

Wall chaser Hammer Flex STR150 is a double disc wall chaser with a power of 1700 W, disc diameter 150 mm. The maximum cutting depth is 43 mm, three steps of width adjustment — 15/20/30 mm. Equipped with soft start and overload protection. Designed for making grooves (grooves) in concrete, brickwork, stone and similar materials for the purpose of subsequent laying of heating systems, gas supply and electrical wiring. The high power and speed of rotation determine the increased productivity, and the additional handle provides comfort in work.

7 ZUBR ZSH-P30-1400 PST

Wall chaser ZUBR ZSH-P30-1400 PST

The power of the wall chaser Zubr ZSh-P30-1400 PST is 1400 watts. Discs with an outer diameter of 125 mm and a landing of 22.2 mm are installed in it. The engine accelerates them to a speed of 8800 rpm.
The wall chaser ZSh-P30-1400 PST is used for cutting bricks, light and medium concrete. With its help, cavities are prepared for laying pipes, wiring and other communications. This tool will please with high performance, it quickly copes with cutting materials.

The cutting depth is set from 0 to 30 mm, and the width is 3-30 mm. You will adjust these parameters to the dimensions of the required cavity. A vacuum cleaner can be attached to the wall chaser. It collects waste generated during cutting, facilitates cleaning after completion of work.

All components of the wall chaser are protected from dust. This ensures exceptional reliability of the tool, it will serve you for a long time. The speed stabilization system allows you to maintain high performance. The disk rotation speed does not drop under load, which has a positive effect on the comfort of the workflow.

6 Makita SG1251J

Wall chaser Makita SG1251J

Shtroborez Makita SG1251J — equipment from a manufacturer with a worldwide reputation. This company has proven itself from the best side. You will be able to fully use the presented tool and be sure of its reliability.

Shtroborez Makita SG1251J is used to perform shtrob. With it, you can cut a long furrow in the material. In the future, it is used for laying various cables, it is possible to hide the wires and not spoil the interior of the room.

The power of the presented tool is 1400 watts. This is enough for equipment of this class. The maximum idle speed is 10,000 rpm.
The number of working disks is 2 pieces. The parameters of the strobes performed can be adjusted taking into account the necessary indicators. The depth is in the range of 0-30 mm, the width is 6-30 mm.

A soft start system has been implemented. It eliminates additional load on the engine when starting the equipment. A vacuum cleaner can be attached to the equipment if necessary. It will remove the resulting dust and provide comfortable work.

5 CALIBER ShTBE-2600/230M

Wall chaser CALIBER STBE-2600/230M

Manual electric wall chaser Caliber ShTBE-2600/230m is designed for cutting grooves (strobe) in concrete, foam concrete, brick, stone and similar materials only without the use of water.

4 ZUBR ZSH-30-1200 T

Wall chaser ZUBR ZSH-30-1200 T

Professional wall chaser ZSh-30-1200 T is used for cutting bricks and light concrete grades. With its help, cavities are prepared for laying pipes, wiring and other communications. The tool is equipped with an engine with a power of 1200 W, it is prepared for significant loads during operation.

The wall chaser uses a saw blade with an outer diameter of 125 mm. Its landing size is 22.2 mm. The cutting width of materials is 3-30 mm, and the depth is 0-30 mm. These values ​​are quickly set during operation, taking into account the dimensions of the required cavity for communications.

The shtroborez has a protective cover. It protects the operator from accidental injury when in contact with the saw blade. In addition, to increase the security of the tool, a blocking of unintentional launch has been implemented.

The spindle in the wall chaser Zubr ZSh-30-1200 T is blocked when replacing discs. When installing other equipment, you do not need to use additional tools to fix the spindle in the desired position. This wall chaser is extremely compact and manoeuvrable, with comfortable handles and simple controls.

3 Makita SG150

Wall chaser Makita SG150s>

If it is necessary to make furrows in concrete, stone or brick walls, the Makita SG-150 wall chaser is an ideal tool. This is a professional tool, characterized by low vibration and noise. When overheating, the device turns off automatically. It is very easy to make channels and strobes for pipelines and electrical wiring with it.

The main features of the Makita SG-150 model are the accuracy and reliability of the cut, as well as high productivity. The presence of a dust-proof motor with a power of 1800 W, as well as two saw blades with a size of 150 mm, makes it possible to make sufficiently deep and wide cuts. Among the main functions of the device, it is necessary to highlight the possibility of adjusting the speed, the width of the cut, soft start. The wall chaser guarantees stable operation even under heavy loads. The advantage of the product is overload protection. The device is completed with a tightening key, intermediate rings and a case.

2 Interskol PD-230/2600E

Wall chaser Interskol PD-230/2600E

INTERSKOL presents a professional wall chaser based on an angle grinder with a modified gearbox. The design allows you to easily and quickly perform strobes, the rollers on the casing allow you to drive the machine smoothly and confidently on the surface. The width of the strobe is regulated by distance washers, and the depth — by the disk offset adjustment unit.

1 BOSCH GNF 35 CA

Wall chaser BOSCH GNF 35 CA

The wall chaser Bosch GNF 35 CA is a professional construction tool operating with a power of 1400 W and a top speed of 9300 rpm. The system is equipped with two working discs with a diameter of 15 cm and a fit of 22.2 mm. The equipment is capable of cutting surfaces with a width of 7-39 mm and a depth of up to 3.5 cm. The design is complemented by a tight protective cover, double insulation and a reliable spindle lock. The installation operates at a noise level of 113 dB, weighs 4.7 kg and has dimensions of 34.6 × 31.6 cm.

The Bosch GNF 35 CA device allows you to independently select the desired cutting width and use the depth gauge. The device is supplemented with a soft start function and the ability to connect a construction vacuum cleaner. The tool guarantees stable operation of revolutions under heavy load, and is also complemented by protection against accidental switching on and motor overloads. The equipment is supplied in a case with three 4 mm spacers, four 6 mm washers, clamping and open-end wrenches, and a support flange.

Метки: chasers:, expert, features, wall