Top-10

Recently, plasma cutters have been used in private homes, workshops and garages. The advantage of this method of cutting metal is the speed and high quality of the cut. Using hot plasma, you can work with different metals, from stainless steel to non-ferrous alloys. Unlike a grinder, a plasma cutter allows you to make curly cuts without additional finishing.

Inverter Rating

7 CUT-45i

CUT-45i Inverter Air Plasma Cutting Machine

The 220V OMAX CUT-45i air plasma cutting machine is used for cutting various types of metals: copper, aluminum, carbon steel. Due to its low weight and compact dimensions, the product can be used in a workshop or a small workshop.
The maximum steel thickness of 12 mm provides a wide range of work. There is a built-in moisture separator, which increases the life of the components and improves the quality of work. For full operation, you must connect the compressor.

6 START Start Shark X40

Inverter for plasma cutting START Start Shark X40

Air plasma cutting machine START SHARK x40 — Compact source for air plasma cutting of metals, combines high cutting speed combined with good quality and reasonable price.

5 Aurora AIRHOLD 45

Inverter for plasma cutting Aurora AIRHOLD 45

AIRHOLD 45 is designed for plasma cutting of any conductive materials: mild steels, stainless steels, galvanized steels, aluminium, copper and various alloys. The work of this machine is of high quality and high cutting speed. With a source weight of only 9 kg, the maximum thickness of a separating cut of sheet structural steel is 12 mm, and the maximum thickness of a cut of small structures and fittings reaches 16 mm! AIRHOLD 45 is powered by a conventional 220V network, which makes it possible to work with this device almost anywhere. A compressor must also be connected to the inverter to supply compressed air.

4 RESANTA IPR-40

Inverter for plasma cutting RESANTA IPR-40

Inverter plasma cutter Resanta IPR 40 is designed for high-quality cutting of sheet metal with minimal deformation. Smooth adjustment of the welding current allows you to accurately set the desired mode of operation. Automatic arc ignition system with 5 second interval. A manometer is provided on the front panel, which allows visual control of operating parameters. The torch requires a connection to a compressed air source.

3 Svarog REAL CUT 45 (L207)

Inverter for plasma cutting Svarog REAL CUT 45 (L207)

The budget and practical device from the Svarog company, REAL CUT 45 (L207), is designed for high-quality and fast plasma cutting of metals. Combines a high level of reliability and excellent edge quality after cutting. Modern element base, high-frequency arc excitation, the ability to cut metals up to 12 mm thick, high PV and efficiency are the main features of an affordable device. The high stability of the torch during household voltage surges, power supply from the 220V network and small dimensions make it possible to use REAL CUT 45 (L207) in any place where metal cutting is required and there is access to the mains. This model will be an excellent solution for everyday tasks, for work in workshops, on construction sites and for repair services.

2 Aurora Jet 40

Inverter for plasma cutting Aurora Jet 40

The AURORA Jet 40 plasma cutting machine is used to work with various conductive materials: carbon steel, stainless and galvanized steel, aluminum, copper, etc. Jet 40 will help you cut metal with high speed and high quality cut. High-frequency ignition of an arch provides smooth and high-quality start. One of the main features of this device is the adjustment of the blowdown after cutting up to 20 seconds.

1 ELECTROLITE CUT-40 (Thickness 1-12mm)

ELECTROLITE CUT-40 Plasma Inverter (Thickness 1-12mm)

Inverter plasma cutting machine ELECTROLITE CUT-40 is designed for plasma cutting of any conductive materials: mild steels, stainless steels, galvanized steels, aluminum, copper and various alloys. The work of this machine is of high quality and high cutting speed. With a source weight of only 9 kg, the maximum thickness of the separation cut of sheet structural steel is 12 mm. The plasma cutter CUT 40 is powered by a conventional 220V network, which makes it possible to work with this device almost anywhere. A compressor must also be connected to the inverter to supply compressed air.

Метки: cutting, inverters, plasma