Top 10 motor drills: characteristics



[ad_1]

Motor drill is relatively simple and safe to use unit. Allows you to make holes in the ground of different depths for fencing, poles or make holes for planting. Some anglers take ice fishing with them to break through the ice. Today, hundreds of models are available in hardware and home appliance stores.

Rating of motor drills

10 PATRIOT AE 70 D 3.5 HP

Motodrill PATRIOT AE 70 D 3.5 hp

Motodrill Patriot AE70D, equipped with a two-stroke engine with a power of 3.5 hp. (which is equivalent to 2500W) refers to professional grade equipment. It is worth noting the high level of reliability of the motor, which has a large operational resource. The device is used for drilling wells not only in the ground, but also in ice. The motor drill is not equipped with a drill: you can choose it yourself, based on your needs, due to production needs. It is allowed to install a drill with a diameter of up to 350 mm inclusive.

The Patriot AE70D motor drill uses gasoline as fuel. The volume of the fuel tank is 1.3 liters. Important from the point of view of ensuring safety, the function of the motor drill is to block accidental activation. The rubberized handles make it easy to operate the device, which is convenient to use both with and without gloves. In addition to the instruction manual, which is distinguished by its detail, a spark plug wrench is included in the delivery package of the motor-drill.

Briefly about the product

  • Power 2.57 kW
  • Two-stroke engine 70 cm³
  • Connection diameter 20 mm
  • Drill diameter 40-350 mm
  • Drilling Surface: Ground
  • For two people
  • Weight 9.1 kg

9 Hammer MTB80 2.5 HP

Motodrill Hammer MTB80 2.5 hp

The HAMMER FLEX MTB80 motor drill is a semi-professional tool with a 2.45 hp engine. Suitable for drilling holes for landing or installing a fence and ice for winter fishing.

Peculiarities:
Reliable engine
Using a primer, pump fuel into the carburetor. So you can easily start the drill even in the cold.
Double air filter protects the engine from clogging and premature wear.
Thoughtful design
The gear reducer is located at an angle, this reduces the noise level.
Plastic handles with non-slip grips — you hold the tool firmly, it does not slip out of your hands.
The controls are collected in one place. You do not have to look for the right button for a long time.
Comfortable work
The engine is fixed on screws with a rubber gasket. This reduces vibration, hands get tired less.
Augers of different diameters are suitable for work: from 80 to 250 mm. Select equipment according to the type of work.

Briefly about the product

  • Power 1.8 kW
  • Two-stroke engine 51.70 cm³
  • Connection diameter 20 mm
  • Drill diameter 80-250 mm
  • Maximum drilling depth 80 cm
  • Surface for drilling: soil, ice
  • Functions: shock-absorbing grip pads
  • For one person
  • Weight 9.8 kg

8 Huter GGD-52 1.9 HP

Motodrill Huter GGD-52 1.9 hp

The HUTER GGD-52 motor drill is among the light class tools and is suitable for single operator control. Equipped with a two-stroke engine, the model can make holes in both ice and soil, depending on the type of auger installed. The largest auger diameter that you can use with this motor drill is 300 mm. The maximum drilling depth in ice or soil is 180 cm.

The gasoline engine used in the HUTER GGD-52 motor drill is a two-stroke one and is characterized by a power of 1400 W (1.9 hp). The source of fuel for it is a gas tank that can hold up to 1.2 liters of a two-stroke fuel mixture. Due to the primer for pumping fuel, the engine of a gas tool starts confidently even at low temperatures. With a weight of 6.8 kg, the motor-drill has rubberized handles / pads, blocking accidental activation.

Briefly about the product

  • Power 1.4 kW
  • Two-stroke engine 52 cm³
  • Connection diameter 20 mm
  • Drill diameter 300 mm
  • Surface for drilling: soil, ice
  • Weight 6.8 kg

7 Fubag FPB 52 2.5 HP

Motodrill Fubag FPB 52 2.5 hp

A simple and reliable tool for drilling various soils and ice. Motor drill FPB 52 is actively used in construction and economic activities and allows you to make a well in a high quality and in a short time.

Briefly about the product

  • Power 1.8 kW
  • Two-stroke engine 52 cm³
  • Connection diameter 20 mm
  • Drill diameter 200 mm
  • Maximum drilling depth 80 cm
  • Drilling Surface: Ground
  • Functions: shock-absorbing grip pads
  • For one person
  • Weight 9.6 kg

6 CALIBER BS-1650 2.2 HP

Motodrill CALIBER BS-1650 2.2 hp

With the use of a motor drill Caliber BS-1650, soil and ice are drilled. This equipment is suitable for various types of soil, differing in density and other characteristics. In the prepared holes, plants are planted or posts are installed for the installation of enclosing structures.
Motobur Caliber BS-1650 belongs to the light class. Thanks to this, one operator can work with the equipment, there is no need to involve other people as assistants. This device belongs to the professional category. It is designed for increased loads and active use, is very reliable and will serve you for a long time.

The drill is equipped with a two-stroke internal combustion engine with a power of 2200 watts. The volume of this unit is 51.7 cm3. The fuel used for the equipment is gasoline, which can be easily bought at the nearest gas station.

Fuel is poured into a tank with a capacity of 1.2 liters. This is enough for long-term use of the equipment, there is no need to frequently refuel during operation. The maximum diameter of the installed auger is 250 mm, it is purchased separately. Drilling takes place to a depth of 80 cm.

Briefly about the product

  • Power 1.65 kW
  • Two-stroke engine 49 cm³
  • Connection diameter 20 mm
  • Drill diameter 250 mm
  • Surface for drilling: soil, ice
  • For one person
  • Weight 9.6 kg

5 CHAMPION AG243 1.7 HP

Motodrill CHAMPION AG243 1.7 hp

The Champion motor drill is designed for drilling holes in the ground and in ice. It is intended for use in agriculture, in public utilities, in a summer cottage or a personal plot during construction work. Can be used for fishing. Fuel pump for easy starting in difficult climatic conditions. The body material is resistant to low temperatures. Quick Start system for easy starting. Interchangeable augers for drilling soil and ice. Reliable coaxial type of gearbox.

Briefly about the product

  • Power 1.25 kW
  • Two-stroke engine 42.70 cm³
  • Connection diameter 20 mm
  • Drill diameter 60-150 mm
  • Drilling Surface: Ground
  • Functions: auger included
  • For one person
  • Weight 9.2 kg

4 Carver AG-62/000 3 HP

Motodrill Carver AG-62/000 3 hp

Motor drill Carver AG-62/000 easily copes with making holes in ice and soil. The tool can be used in the most difficult climatic conditions. The drilling depth with its use can reach 1 m. The two-stroke engine of the tool has a power of 2200 watts. It is capable of up to 7500 rpm. The motor-drill Carver AG-62/000 works from gasoline. From accidental activation, it is equipped with a lock. All characteristics of the motor drill indicate that it belongs to professional tools.

Briefly about the product

  • Power 2.2 kW
  • Two-stroke engine 62 cm³
  • Connection diameter 20 mm
  • Drill diameter 100-500 mm
  • Maximum drilling depth 100 cm
  • Drilling Surface: Ground
  • Weight 9.4 kg

3 ELITECH BM 64V Promo 3 HP

Motodrill ELITECH BM 64V Promo 3 hp

Motor drill gasoline BM 64V Promo with a two-stroke air-cooled engine is designed for drilling soil and ice with an auger with a diameter of 40 mm to 200 mm to a depth of 1.8 meters. ).Augers for different types of soil differ in the cutting head.The auger is not included in the package of the motor-drill.

Briefly about the product

  • Power 2.22 kW
  • Two-stroke engine 58 cm³
  • Connection diameter 20 mm
  • Drill diameter 40-200 mm
  • Maximum drilling depth 180 cm
  • Surface for drilling: soil, ice
  • For one person
  • Weight 8.7 kg

2 RedVerg RD-EA490 2.2 HP

Motodrill RedVerg RD-EA490 2.2 hp

The RedVerg RD-EA490 motor drill is not equipped with a drill: this accessory is purchased separately. You can use drills with a diameter of up to 200 mm. The model used for drilling holes in soil and ice is suitable for private and semi-professional use. The tool is standalone and can be used wherever it is needed, regardless of the ability to connect to the network. The fact is that the drill is driven by a two-stroke engine, the working volume of which is 49 cm³. Gasoline is used as fuel. The volume of the fuel tank, equal to 1.3 l, is sufficient to ensure a significant duration of the operation of the motor drill, the distinguishing feature of which is low fuel consumption.

The RedVerg RD-EA490 motor drill is compact and lightweight. The motor drill can be moved from place to place without any difficulties. The package includes a set of necessary tools. The motor drill is packed in a box that has an attractive appearance.

Briefly about the product

  • Power 1.62 kW
  • Two stroke engine
  • Connection diameter 20 mm
  • Drill diameter 80-200 mm
  • Surface for drilling: soil, ice
  • For one person
  • Weight 13.8 kg

1 BISON MB2-250 2.5 HP

Motodrill ZUBR MB2-250 2.5 hp

Motor drill Zubr MB2-250 is a universal tool used for drilling holes in frozen, hard or soft ground, necessary for the subsequent installation of poles or fences. The special design of the handle allows the device to be operated by both two and one operator. The Zubr MB2-250 motor drill is based on a two-stroke engine with a power of 1800 W (2.45 hp) and a volume of 52 cm³. With this model, a drill with a diameter of up to 250 mm can be used, which during the operation of the device develops a rotation speed of up to 8800 rpm. The fuel is a mixture of gasoline and oil, which is poured into a 1-liter fuel tank. Weighing 10 kg, the drill has a width and height of 540 mm and 375 mm, respectively.

Briefly about the product

  • Power 1.8 kW
  • Two-stroke engine 52 cm³
  • Connection diameter 20 mm
  • Drill diameter 250 mm
  • Surface for drilling: soil, ice
  • For one person
  • Weight 10 kg
Метки: , , ,

Добавить комментарий