TOP 10 best storage electric water heaters 50 liters



[ad_1]

An electric water heater is a thing in the apartment no less important than a convenient washing machine or a powerful washing vacuum cleaner.

But a water heater is not just heating water, it is also convenience, reasonable savings and independence from utilities and pressure testing periods.

In addition, the modern functionality and features of the internal coating of many tanks make it possible to significantly improve the quality of hot water for the whole family to a level suitable for bathing babies, which has a positive effect on the health and mood of the household.

How to choose a storage water heater?

In terms of functionality and technical parameters, all electric storage water heaters are similar, although some technical nuances still exist.

You need to choose a device precisely according to technical criteria, because the comfortable operation of the device depends on it:

  • Energy source. Water heaters can run on gas or electricity. Electric boilers are cheaper than gas boilers, easier to install, and the user can independently choose the installation location. Gas appliances are tied to a fuel source and are considered less safe.
  • Volume of the tank. This is the main criterion when choosing a water heater, because hot water should be enough for the whole family. On average, a 50-liter boiler is enough for a family of two.
  • Power. From this characteristic depends on how quickly the device warms up the water. But buying a device of maximum power is not worth it. Many homes have old aluminum wiring that may simply not be able to withstand such a load, so it is better to choose a device with an average power.
  • Type of allocation. According to this criterion, boilers are divided into two types — wall and floor. Water heaters of 50 liters usually involve wall installation, because in this case it practically does not take up space in the toilet or bathroom.

You should also pay attention to the inner lining of the tank. It determines the resistance of the product to sudden temperature changes and corrosion.

There are a few more points to consider when choosing a water heater.:

  • the presence of a magnesium anode, which reduces the formation of scale and prolongs the life of the heater;
  • the presence of a drain valve — the function of draining water is essential in case of equipment downtime or when it is placed in an unheated room;
  • the presence of a conveniently located service hole designed to clean the inner surface of the tank from scale and sediment;
  • system for connecting to the water supply network — here you should consider the diameters of the outlet hoses and understand how common they are in the region and whether they can be quickly replaced in the event of a rupture;
  • pressure valve (bypass) — serves to protect the device from power surges, and also maintains the integrity of the tank when water is heated;
  • location of heating elements — there are submersible heating elements that are placed directly in the water and require periodic cleaning and replacement, and “dry” heating elements that do not come into contact with water and, accordingly, are more durable in use.

Rating of the best models

Electrolux EWH 50 Quantum Pro

Electrolux EWH 50 Quantum Pro

Electrolux EWH 50 Quantum Pro is an electric storage water heater with a rounded shape and a narrow diameter, which is ideal for placement in confined spaces. The EWH 50 enamelled water heater is equipped with one heating element (1500 W). On the bottom cover of the device there is an intuitive control panel with a knob for setting the desired water heating temperature in the range from 30 to 75C. By the way, in the ECO mode, the water will only heat up to a temperature of 55C, and the formation of scale will be minimized. Corrosion resistance is ensured by multi-level protection of all important structural elements, a finely dispersed enamel coating of the inner surface of the tank — Protect Tank and a magnesium anode of increased mass. Advanced technologies were used in the production: Temperature control — automatic control and indication of water temperature, Energy Conservation — thanks to them and highly efficient thermal insulation from environmentally friendly polyurethane foam, heat losses are reduced.

Main characteristics:

  • Dimensions (WxHxD): 38.5 x 70.3 x 38.5
  • Power: Power
  • Tank finish: enamel
  • Heating time to maximum temperature: 96 minutes (75°C)
  • Mechanical control
  • Heating element: submersible heating element
  • Protection against switching on without water, against overheating
  • Has a check valve
  • Basic operating modes: normal and economical, the ability to select the temperature value

Advantages:

  • fast heating;
  • acceptable size;
  • low cost;
  • silent operation;
  • keeps warm for a long time.

Flaws:

  • ill-conceived fasteners;
  • incorrect temperature display.

Zanussi ZWH/S 50 Orfeus DH

Zanussi ZWH/S 50 Orfeus DH

Water heater Zanussi ZWH/S 50 Orfeus DH storage type has an internal tank of 50 liters, the water from which is heated to the desired temperature in 162 minutes. The built-in indicator will promptly inform you about the readiness of the device to start working.
The Zanussi ZWH/S 50 Orfeus DH model is equipped with mechanical switches, through which you can easily select the desired parameters. The magnesium anode prevents the formation of a corrosive coating, thereby significantly extending the operational period of this household helper. The corresponding indicator will report on the progress of heating the liquid.

Main characteristics:

  • Dimensions (WxHxD): 39 x 72.1 x 43.3
  • Power 1.5 kW (220 V)
  • Tank coating — enamel
  • Heat-up time to maximum temperature: 162 minutes (75°C)
  • Mechanical control
  • Heating element: dry heater
  • Protection from switching on without water, from overheating. There is a check valve.
  • Basic operating modes: normal and economical, the ability to select the temperature value.
  • Equipped with water disinfection function

Advantages:

  • nice design, delicate shade of white;
  • good build quality;
  • elementary and understandable management;
  • dry heater;
  • low cost;
  • enameled tank that will not rust;
  • turns off automatically.

Flaws:

  • it is difficult to remove the sticker from the case, although the instructions require it to be removed before use;
  • no timer;
  • short wire.

Electrolux EWH 50 Heatronic DL Slim DryHeat

Electrolux EWH 50 Heatronic DL Slim DryHeat

The EWH 50 Heatronic DL Slim DryHeat is a reliable, electronically controlled water heater. A unique advantage of the water heater is the function of programming three individual heating temperatures. An electronic control panel is located on the bottom cover of the water heater. It contains buttons with which you can set the desired water heating temperature in the range from 30 to 75 ° C. The system of «DRY» independent heating elements — «X-HEAT» — these are two independent «dry» heating elements that do not have direct contact with water. The heating elements are located in special metal casings fixed on the flange at the bottom of the tank, which limits the formation of scale on the heating elements. The independent operation of the heating elements allows the water heater to continue to work in the event of a malfunction of one of them. That. the X-Heat system significantly increases the service life of the water heater.

Main characteristics:

  • Dimensions (WxHxD): 34 x 86 x 34
  • Power: 1.5KW (220V)
  • Tank coating — glass-ceramic
  • Heating up time to maximum temperature: 111 minutes (75°C)
  • Electronic control
  • Heating element: dry heater — 2 pcs.
  • Protection against switching on without water, against overheating. There is a safety valve.
  • Basic operating modes: normal mode, ECO mode, 3 individual water temperature settings

Advantages:

  • design, compactness;
  • electronic intuitive control;
  • the ability to save «favorite» temperatures in the device’s memory on the corresponding buttons for individual settings;
  • fast heating;
  • 2 «dry» heating elements equipped with protection;
  • good thermal insulation;
  • high reliability and safety.

Flaws:

  • no display backlight;
  • it is desirable to mount it higher, since the tank control panel is located below.

Atlantic Vertigo Steatite Essential 50 E

Atlantic Vertigo Steatite Essential 50 E

Modern French boiler with the lowest maintenance cost and the lowest cost of ownership among all water heaters on our market. Like many other Atlantic models, it is equipped with dry heating elements (there are two of them at once) based on the natural material steatite. Such heating elements in Atlantic boilers do not need to be replaced every two 2-4 years, as in typical Chinese boilers.

Heating elements in Atlantic models easily serve for 10 years, and in some cases up to 20. The magnesium anode also needs to be changed much less often — once every two years, and not once a year, like in Chinese models. Therefore, Atlantic boilers are the most profitable in terms of cost of ownership. It is 5 thousand rubles for 7 years — against 17 thousand rubles from inexpensive Chinese boilers.

Still steatite heating elements make Atlantic boilers the quietest — thanks to their (heating elements) design, the intensity of scale formation is reduced to a minimum, as well as its accumulation on the protective flask in the form of solid limescale. Which already after a year and a half appears in cheap Chinese heaters in the form of a fairly solid «crust» on the heating element and significantly increases the noise level.

Finally, Atlantic are the most energy efficient water heaters. «Dry» heating elements Atlantic heat up quickly and cool down slowly. And due to the excellent thermal insulation, they effectively maintain the temperature of the water. Therefore, as a result, the boiler spends less electricity both on heating water and on maintaining the required temperature. As a result, Atlantic models have the highest ‘B’ rating in the European ErP energy efficiency classification for domestic water heaters. Typical Chinese models with «wet» heating elements have at best «C» (the lower the alphabet, the worse), which means at least 10% increased power consumption.

Main characteristics:

  • Dimensions (WxHxD): 49 x 76 x 31 cm
  • Power 2.5 kW (230 V)
  • Tank cover — enamelled steel
  • Heating up time to maximum temperature: 122 minutes (63°C)
  • Mechanical control
  • Functions: indication of inclusion; antibacterial protection; ultra-precise electronic thermostat
  • Heating element — two «dry» steatite heating elements
  • Protection: from switching on without water, from overheating, from scale. There is a safety valve.

Advantages:

  • original European development and assembly — no China, like almost all competitors;
  • high build quality;
  • design, compactness;
  • high power, quickly heats water;
  • 2 «dry» steatite heating elements;
  • very simple and convenient control;
  • the lowest noise level;
  • highest economy.
  • most importantly: the lowest cost of ownership and the lowest cost of maintenance — among boilers of any manufacturer. Thanks to the unique steatite heating element, which lasts not 2-4 years, but 10-20 years.

Flaws:

  • I would like electronic control with a screen.

Electrolux EWH 50 Centurio IQ 2.0

Electrolux EWH 50 Centurio IQ 2.0

Water heater Electrolux EWH 50 Centurio IQ 2.0 with an internal stainless steel tank, it has high-quality thermal insulation (CFC-Free) and the ability to adjust the temperature from 30 to 75 ° C in 1 ° C increments.
Wi-Fi connection via USB connector allows remote control of water heating from anywhere in the world. To control the water heater using Wi-Fi, a removable Smart Wi-Fi module is used, which is attached to the device. This will significantly save energy costs. Thanks to the built-in timer, the device independently calculates the time for heating water, which saves energy. And with the help of the LED display adjustment knob, you can set the heating temperature with an accuracy of 1°C. The water heater can be installed both vertically and horizontally.

Main characteristics:

  • Dimensions (WxHxD): 43.5 x 97 x 26
  • Power: 2 kW (220 V)
  • Tank cover — stainless steel
  • Heat-up time to maximum temperature: 114 minutes (75°C)
  • Electronic control, control via wi-fi and a special mobile application is possible.
  • Functions: indication of inclusion, heating, there is a thermometer and a display; self-diagnosis possible; temperature limitation is allowed; it is possible to set a timer; delayed heating possible.
  • Heating element: dry heater
  • Protection: UZO, from switching on without water, from overheating. There is a safety valve.

Advantages:

  • possibility of mounting vertically or horizontally;
  • stainless steel tank;
  • control via wi-fi;
  • delayed start;
  • fast heating;
  • dry heater equipped with protection.

Flaws:

  • flash drive not included
  • very soft body material — dents are easily formed;
  • unreliable safety valve;
  • it is forbidden to plug it into a socket without water, even for checking — the protection hidden in the case without free access is triggered, that is, you need to call a specialist;
  • short fastening anchors, it is desirable to replace them with longer ones during installation.

Zanussi ZWH/S 50 Splendore XP 2.0 Silver

Zanussi ZWH/S 50 Splendore XP 2.0 Silver

The Zanussi ZWH/S 50 Splendore XP 2.0 Silver water heater is a powerful storage appliance with an elegant rectangular design. A 50-liter tank is mounted vertically or horizontally, requiring a communications connection from below. Comfortable operation is facilitated by the presence of a unique control function from a smartphone.
The Zanussi ZWH/S 50 Splendore XP 2.0 Silver is equipped with simple mechanical controls, a display and bright indicators. Thanks to a powerful tubular heater, the water in the tank reaches 75 degrees in 114 minutes. The system is supplemented with protection against overheating and a shutdown function in case of malfunctions.

Main characteristics:

  • Dimensions (WxHxD): 43.5 x 97 x 26
  • Power 2 kW (220 V)
  • Tank cover — stainless steel
  • Heating up time to maximum temperature: 90 minutes (75°C)
  • Electronic control, remote control possible
  • Functions: indication of inclusion, heating; there is a thermometer and a display; temperature limitation is allowed; there is an eco mode; there is a timer; equipped with an antibacterial water disinfection system
  • Heating element: submersible heating element
  • RCD protection, from switching on without water, from overheating. There is a safety valve.

Advantages:

      • good design, flat body;
      • «smart» timer;
      • several steps of power;
      • universal mount;
      • reliable and safe.

Flaws:

  • difficult to understand mobile application;
  • There is no wi-fi module included.

Electrolux EWH 50 Formax DL

Electrolux EWH 50 Formax DL

The Electrolux EWH 50 Formax DL water heater is a model in which water is stored in a 50 liter tank protected from corrosion by a glass enamel coating. Electrolux EWH 50 Formax DL is equipped with a tubular heating element, which allows you to reach the required temperature in 108 minutes. The presence of a check valve helps prevent the failure of this element. For accelerated heating, a corresponding function is provided.
The maximum water heating temperature is 75 degrees, while the pressure range of permissible pressure is 0.8 atm. — 6 atm. Water heater power — 2 kW. The selected operating mode and temperature are displayed on the built-in display.
Long service life of the device is provided by protection against an overheat and protection of the case against splashes of water. To increase the comfort of wall mounting, it was equipped with special mounts, and the design of the device allows you to install it both horizontally and vertically. The water supply pipe is at the bottom.

Main characteristics:

  • Dimensions (WxHxD): 34.4 x 82.5 x 35
  • Power 2 kW (220 V)
  • Tank coating — enamel
  • Heat-up time to maximum temperature: 119 minutes (75°C)
  • Electronic control
  • Functions: indication of inclusion, heating; there is a thermometer and a display; temperature limitation is allowed; there is an eco-mode and 3 individual heating modes
  • Heating element — dry heater
  • Protection: UZO, from switching on without water, from overheating. There is a safety valve.

Advantages:

  • good design, flat body;
  • convenient management;
  • good thermal insulation;
  • reliable and high quality.

Flaws:

  • heavy weight (even without water);
  • the temperature indicator lights up constantly and quite brightly;
  • short installation anchors, must be replaced during installation.

Timberk SWH FSL2 50 HE

Timberk SWH FSL2 50 HE

The storage water heater Timberk SWH FSL2 50 HE has a good capacity (50 l), which makes it suitable for use in a small family. The smooth white body of an oblong shape is fixed on the wall in a horizontal position, and the connection is made from below. The so-called «dry» heating element is installed in the water heater, which looks like a heating element enclosed in a special flask. Such a heating element does not come into contact with water, which eliminates the appearance of scale on it, which means that the water heater will work for a long time and efficiently.
The water in the Timberk SWH FSL2 50 HE water heater heats up quite quickly (in 43 minutes) to a maximum temperature of 75 °C. If necessary, you can select a more suitable temperature using the rotary switch. A two-color indicator to determine the enabled mode will allow you to visually control the correctness of the operating parameters. A magnesium anode is placed inside the water heater, which helps to avoid corrosion of internal elements. Protection against overpressure inside the tank and against leakage ensures safe operation of the water heater.

Main characteristics:

  • Dimensions (WxHxD): 93.5 x 43.4 x 23
  • Power 2 kW (220 V)
  • Tank cover — stainless steel
  • Maximum heating temperature 75°C
  • Mechanical control
  • Functions: indication of inclusion, heating; there is a thermometer and a display; temperature limitation allowed
  • Heating element — submersible heating element
  • Protection: UZO, from switching on without water, from overheating. There is a safety valve.

Advantages:

  • nice «calm» design;
  • simple control;
  • fast heating.

Flaws:

  • low-quality body metal;
  • inaccurate temperature indication.

Electrolux EWH 50 Major LZR H

Electrolux EWH 50 Major LZR H

The highly efficient and elegant water heater Electrolux EWH-50 Major LZR is perfect for installation in almost any type of premises. High reliability of components, high-quality copper heater and stainless steel inner tank guarantee productive operation for a long time.

Main characteristics:

  • Dimensions (WxHxD): 93 x 43.4 x 25.3
  • Power 2 kW (220 V)
  • Tank cover — stainless steel
  • Heating up time to maximum temperature: 120 minutes (75°C)
  • Mechanical control
  • Functions: indication of inclusion, heating; there is a thermometer and a display; temperature limitation is allowed; There are full and half power modes.
  • Heating element: submersible heating element
  • Protection: from switching on without water, from overheating. There is a safety valve.

Advantages:

  • good price;
  • compact, lightweight;
  • reliable and safe.

Flaws:

  • mechanical control;
  • long heating.

Thermex Champion Silverheat ESS 50 H

Thermex Champion Silverheat ESS 50 H

The Thermex ESS 50 H Silverheat storage water heater has a high-strength metal body painted white. The tank holds 50 liters, has a horizontal installation and bottom connection. Mechanical control is used. The water heater has a capacity of 0.83 l / min, operates at a pressure of 0.5-6 bar and a rated power of 1.5 kW and heats water up to 75 degrees in 105 minutes.
The device is mounted on the wall and has a round tank shape. A thermometer is provided. The water heater weighs 16.5 kg and has dimensions of 72.2 × 45.9 × 44.5 cm. The equipment is equipped with four degrees of water protection, a check valve and a heating limiter.
The Thermex ESS 50 H Silverheat model is equipped with a tubular heating element and an enamel coating on the inner walls. Presence of indicators of heating and inclusion is provided. The water heater is supplemented with a protective shutdown system and an overheating protection system.

Main characteristics:

  • Dimensions (WxHxD): 72.2 x 36.5 x 37.5
  • Power 1.5 kW (220 V)
  • Tank coating — glass-ceramic
  • Heat-up time to maximum temperature: 114 minutes (75°C)
  • Mechanical control
  • Functions: indication of inclusion, heating; there is a thermometer; temperature limitation allowed
  • Heating element: submersible heater — 2 pcs.
  • Protection: RCD. There is a check valve.

Advantages:

  • low price;
  • quality assembly.

Flaws:

  • the regulators are on the side, that is, when installing the device in a niche, access to them is difficult;
  • no self-diagnosis.
Метки: , , , , ,

Добавить комментарий